Pre Assembled Board - £159

This PCB is a direct replacement for the Stern MPU-100 & MPU-200, and the Bally AS-2518-17, AS-2518-35 & AS-2518-133.

The PCB fits on the original mounting pins in your game, and has been produced using through hole components (chips are socketed too) - meaning IF you ever needed a repair, it is easy, inexpensive and quick. All the online guides on how to fix your original Bally and Stern boards can be applied to this MPU, as it uses most of the same components - and still retains the original 7 flash start-up procedure.

Many of the original hard to obtain ICs, such as the 5101, 6810, and clock generating devices have been worked around using modern and easy to obtain components meaning you no longer have to worry about battery damage or batteries, - as this doesn't need them. Game roms are combined, and only two 32K roms are now used.

Each PCB is hand assembled in the UK, before being professionally and mechanically cropped and then flow soldered. Every board is then tested using an original factory Bally test rig. This MPU design has been tested by many pinball technicians around the UK for approximately two years - with no reported issues or problems.

**This board is supplied and sent without game roms. If you are unable to provide your own game roms, we will provide a set free of charge, and ONLY for the game you own.

We do not sell game roms

Self Assembly Version - £99

Our Bally / Stern Eurodash 300 MPU / CPU Pinball Board Kits come ready to assemble with a blank CPU board, all components separately bagged and labelled and a comprehensive and easy to follow manual explaining how to assemble at home. No roms are included.

We recommend that only individuals with prior knowledge of circuitry and soldering purchase this item, as it does NOT come pre-assembled.

This MPU design has been tested by many pinball technicians around the UK for approximately two years - with no reported issues or problems.

.